News Hotspot
Wishing you a prosperous start in 2025!
Application of LED lens group
Headlamp intelligent manufacturing
LED lens specification classification
Release Time:
Aug 30,2024
This lens is generally used in large angle (40-80 degrees) spotlighting, such as table lamps, street lamps, indoor lamps and so on.
①Penetrating type (convex lens) when the LED light through the lens of a curved surface (biconvex there is a curved surface) when the light will be refracted and spotlight, and you can adjust the distance between the lens and the LED, the angle will also change, the distance is large (small) angle is small (large). After the aspheric technology designed surface spot will be very uniform, but because of the limitations of the lens diameter, the lens side of the light can not be used (light leakage); this lens is generally used in large angle (40-80 degrees) spotlighting, such as table lamps, street lamps, indoor lamps and so on.
②Total reflection type (cone or cup) The design of the lens in front of the penetrating light gathering, and the cone can collect and reflect all the side light, and the overlap of these two kinds of light (the same angle) can get the most perfect light use and beautiful spot effect; also can make some changes in the surface of the conical lens can be designed into a mirror, frosted surface, bead surface, striped surface, threaded surface, convex or concave surface, etc. to get a different spot effect. Different spot effects.
③LED lens module will be more than a single lens combination arrangement through the injection moulding to complete a whole, according to different needs can be designed into 3 in 1, 5 in 1 or even dozens of one lens module; this lens can effectively save production costs, achieve consistency in product quality, save space for the lamps and lanterns mechanism, and it is easier to achieve the ‘high power’ and so on. Characteristics.
Phone/whatsapp